prduct_mian

Masters Silicone Sealant - Kitchen and Bath ::

Masters High Heat Silicone Sealant ::

Masters Silicone Tooling Foam::

Spray foam over top of freshly laid silicone to allow a clean smooth seam to be tooled without excess silicone building up and sticking to your finger and other surfaces
Feature Product Sheet

Masters Silicone Tooling Foam Video::

Masters Leak Detector ::

Quickly locates pin hole leaks.
Non-freezing to -35º F (-37° C).
Easy applicator dauber or spray.
Use on air and gas lines, tanks, cylinders, valves, fittings, tubing, piping, pressure vessels, applicants, etc.
Not for use on Oxygen systems.
Also available in pink if desired
Feature Product Sheet

Masters Aquaproof Shower Pan Liner & Aquaproof Solvent ::

Masters Cutting Oil ::

Masters Lubricating Oiler ::

Formulated for moving parts and bearings of pumps, motors fan, compressors and hydraulic and circulating systems.
Provides anti-wear protection for a wide range of hydraulic pumps and components, especially those designed with close tolerances, operating under extremes of pressure, temperature and pump speeds.
Tested and approved by many pump manufactures.
Protected against rust and corrosion.
Longer pump life.
Feature Product Sheet

Masters All Condition Soldering Paste ::

Sticks and spreads smoothly and evenly on cold or frozen pipe, As well as pipe "wet" with condensation on the exterior
High quality
Thick formulation, stays on work area.
Flows easily with heat.
Draws solder well .
Low fumes.
Joints clean easily after soldering.
Feature Product Sheet

Masters Flame Protector Pad ::

Shields studs, walls, floors and other surfaces from flames, sparks and molten splash during soldering and brazing operation
FPP912 is a high textured silica-based fabric which is flame resistant to 1093 C (2000 F)
FPPHD912 is a fibrous-felt heat shield which is flame resistant to 1371° C (2500° F)
Both products are non asbestos
Feature Product Sheet

Masters Economy and Heavy Duty Test Plug ::

Masters/IPS Washer Box ::

Single or Double Valves available in Sweat, Pex, Dahl, etc.
Most models also available in a Fire-Rated version, and/or with Hammer Arrestors
Come with Valves installed facing downwards for ground floor/upper level installs, or can be switched to face upwards for lower level installations
For complete product availability click here

Masters Urinal Cleanout ::

Masters Epoxy Putty ::

Handy for plumbing repairs to joints and pipes in hard to reach places.
A two-part epoxy.
Adheres to hardness in about 30 minutes. temperature range for application: 6° C to 54° C.
Temperature range after curing: -73° C to 148° C.
Pressure range after curing: to 300 P.S.I.

T-Cone Test Plugs ::

Additional Information ::